skip to Main Content Tel: (480) 607 1507



Safer, easier and quicker to use.


Manufactured by an ISO9000 Certified company.


Rot proof hoses that do not need to be dried after use.


Developed for long-term use.

Fire Hoses


A non-percolating uncoated box hose with a robust polyester jacket.


A non-percolating fire hose with a robust, all-synthetic liner and with protective coating for easy handling and long life.


A non-percolating hose with a robust, all-synthetic jacket.


A modern all-purpose nitrile firehose, ideal for situations involving a chemical, hydrocarbons and gasoline presence.



  • Rot proof. These hoses are rot proof, and need not be dried after use.
  • Increased resistance to weathering and aging. The synthetic fibers in the hose jacket does not degrade
  • Light and flexible. Coil diameter has been reduced for easy handling. The hoses are therefore light and flexible



  • Does not rot and does not need to be dried after use.
  • The synthetic fibres are resistant to the effects of ultra-violet rays.
  • Coil diameter is reduced for easy handling.
  • The hose is light and flexible.
  • Manufactured by an ISO 9002 Approved Company.



  • Easy cleaning. Extruded coating allows hose to be wiped clean after use
  • Easy to repair.
  • Abrasion resistant. Protective coating enhances abrasion resistance and increases life span.
  • Increased resistance to chemicals and oils. Improved protection against oil and chemical contamination.
  • Light and flexible – lighter and smaller coil diameter than conventional rubber-lined hoses.
  • Available in longer or shorter lengths.
  • Manufactured by an ISO 9002 Approved Company.



  • Weather resistant, synthetic fibers offer resistance to ultra-violet rays.
  • Synthetic reinforced jacket for long life.
  • High abrasion resistance.
  • Usable in extreme weather conditions.
  • Extremely durable with long life expectancy.
  • Light weight and easy to deploy.
  • Resistant to oil and chemicals.
  • Easy to clean and roll.
  • Manufactured by an ISO 9002 Approved Company.


As you might expect with the drought my pumps have been going non-stop since spring.
One pump (set at 250 feet depth) recently had an electrical problem, of course, on a weekend. With the help of my wife, we had it out, repaired and running again in two hours. You can’t do that with any kind of pipe!

Bob Puls - California
We chose the WellHose product for our shallow wells (80’ depth) because of the long term benefits – decreased head loss and no corrosion. Our previous steel column pipes were on the verge of falling apart. Instead of replacing the column pipes with galvanized steel, we went with WellHose, at a lower price! The installation was very simple and not labor intensive, and to-date we have not experienced any issues. Should the submersible pumps experience issues, we expect that pump removal/reinstall will be more economical than if we had stuck with steel column pipes!
Max Bricker
J.G. Boswell Co.

The City of Amarillo, Texas has been using Boreline by Hose Solutions since 2010 in its potable water wells. It is a great product to use for work in tight applications where you cannot get a rig in. Our first time to use it was in a well about 600’ deep. Boreline also allows you an energy cost saving over time because it maintains its smooth wall vs the corrosion aspect of steel pipe. Very simple product to use. It has a NSF rating.

Kenneth McColl
City of Amarillo - Texas


Send us a message, we would love to hear from you.

    Back To Top